Your fixing fasteners partner in China
  • sns01
  • sns03
  • sns04
  • sns05
  • sns02

Drop In Anchor2

Drop-In anchors are female concrete anchors designed for anchoring into concrete. Drop the anchor into the pre-drilled hole in the concrete. Using a setting tool expands the anchor within the hole in the concrete.

Drop-in anchor with a notch is a structure consisting of a tapered inner cavity with a thread tapering towards the tip. Due to this, as the bolt is tightened, the anchor begins to expand. This allows the desired structure to be firmly attached to the wall. And due to the thread located on its inner part, it will be possible to easily screw various fasteners into it.

 

▪Material Available – Carbon Steel with zinc plated, Stainless Steel.

▪Custom Sizes - Our unique mass customization manufacturing operation allows us to customize sizes far more easily than any other provider.

▪Custom Finish - We can offer zinc plating, nickel plating, chrome plating, hot deep galvanized, a standard plasticized finish.

The holding values of the Drop-In anchor are mainly dependent on the psi of the concrete and on the depth of embedment. Other factors include if steel rebar is in the concrete and on the full expansion of the Drop-In anchor.

The Drop-In anchor has sides that are smooth to allow for more surface area to be in contact with the concrete, thereby providing consistent holding values.


Installation Instructions

Installation Instructions

As with all female type anchors, the designated diameter of the Drop-In anchor refers to the side diameter of the anchor.

The outside diameter of the anchor is equal to the hole diameter required to be drilled in the concrete.

Minimum embedment for each diameter of Drop-In anchor is the length of the anchor.

The Drop-In Anchor requires the bottom of the hole to set the anchor.

First, drop the anchor in the hole with the threaded open end up towards the surface, then insert proper setting tool and hit with a hammer until the Drop-In anchor is fully set.

Drop-In Anchor

Steel anchor for heavy duty fixing designed for structural fixing, of static type, on solid supports.

1-1195

Item No.

Size

Inner metric thread

Outer anchor diameter

Sleeve length

Bag

Carton

 

mm

mm

mm

pcs

pcs

DA 28001

M6X25

M6

8

25

100

100

DA 28002

M8X30

M8

10

30

100

100

DA 28003

M10X40

M10

12

40

100

100

DA 28004

M12X50

M12

16

50

50

50

DA 28005

M14X55

M14

18

55

35

35

DA 28006

M16X65

M16

20

65

25

25

DA 28007

M20X80

M20

25

80

25

25

Application

Drop-in anchor with a notch can be used for reliable fixation of large-sized equipment in brick, stone, concrete under moderate-heavy loads. Their main use is to insert threaded rod to suspend electrical cable trays, HVAC ductwork and fire sprinkler pipe and heads. It is intended: For the construction of suspension systems; For installation of suspended ceilings; For laying cable routes; For hanging small loads.

  • solid
  • stone

Want to win the competition?

YOU NEED A GOOD PARTNER
All you have to do is contact us and we will provide you with solutions that will allow you to win against your competitors and will pay you handsomely.

Ask For Quote Now!